~~ ~~ . 2001-2005 Honda Civic Coupe & Sedan
 
Fits vehicles running with Honda 1.7L Sohc D17 4 Cylinder or engine swap. 
 
 
Piping kit that comes with this is universal, and will have to be cut to fit.
 
Includes
T3/T4 V-Band Turbocharger
Turbo Manifold 
Front Mount Intercooler
Intercooler Mounting Kit
Piping Kit Includes:
Silicone Coupler Includes
T-Bolt Clamp Includes
Air Intake Filter Includes
Blow off Valve Includes
BOV adapter Flange Includes
Steel Downpipe Tube Includes
Manual Boost Controller Includes
Oil Feed Line Includes
Oil Restrictor Adapter Includes
Oil Return Drain Line Includes
Oil Pan Drain Plug Adapter Includes
T3 4 Bolt Gasket Includes
V-Band Clamp + Flange T3/T4
 
 
TURBOCHARGER
100% Brand New T3/T4 Hybrid Turbocharger! High Quality Guaranteed! cast housing with durable steel. Capable of boosting horse power up To 350+ BHP, standard 4 bolt exhaust flange, Capable of 8 PSI or 15-25 PSI output at peak power. CNC machined flanges. Internal wastegate setting: 8 PSI. High quality t04e with a forged turbine propeller wheel!
 
Turbo Specification:
2.5" V-band Hot Side.
Standard T3/T4 Flange.
Oil Inlet - 1/8 NPT Oil Inlet.
Bearing Type
Journal Bearing.
Wet Floating Bearings.
Cooling Type:
Oil Cooled.
Compressor Specs:
3" Compressor Inlet.
2.07" Inducer, 2.36" Major.
2" Compressor Outlet .
T04B/T4 Type Compressor Housing.
Compressor .50 A.R.
Compressor .57 Trim.
8 Blade Type T4 Compressor Wheel.
Turbine Size:
T3 Type 4 Bolt Turbine flange.
2.5" V-band Exhaust flange.
Turbine .63 A.R. - 2.48" Minor and 2.89" Major Propellar.
T3 Turbine Housing.
2.274" Outlet
TURBO MANIFOLD
Standard T3 Turbo Flange Configuration Outlet.
Increase Engine Intercooler Output and Efficiency.
Made of High Quality Stainless Steel Material for Strength and Durability.
INTERCOOLER:
6061 Light Weight Billet Aluminum Construction.
Tube & Fin Light Weight Design.
Construction: Machine Cut and Stamped Hand Welded.
Working Pressure: 5~50PSI.
Pressure Drop:2~5psi@35psi;0.2~0.5psi@15psi.
Hot Air Temperature: 32°F~302°F (0°C~150°C)
Compress Air Flow Rate: < 350 Cubic Feet/Min Rated to 500 Max HP.
Overall Size - 27" x 7" x 2.5" 9. Core Size - 21" x 6.5" x 2.5" 10. In/Outlet - 2.5" OD / 2.25"
ID PIPING:
Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping.
Powder-Coated Surface Finish.
2.5" Piping Diameter.
2.0mm Pipe Thickness.
Increase 65% Air Flow comparing with other Standard Piping.
SILICONE COUPLER:
Made of high quality silicone material
Thickness of wall:5 mm, 4 ply reinforced
Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI)
Bursting Pressure: 2 Mpa
Working Temperature: -76°F (-60°C ) to +500°F (+260°C)
Size tolerance:+/-0.5 mm
T-BOLT CLAMP:
Made of High quality 301 SS Stainless Steel Clamp
Stainless steel construction resists corrosion
Provide uniform sealing pressure for a positive
Polished finish increases engine bay aesthetics
AIR FILTER:
Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable.
Improves Up to 95% Filtration Efficiency.
Designed to increase horsepower and acceleration.
Width: 6" Inlet: 3.0" Overall Tall: 3.5" Mesh Tall: 2.5"
BLOW OFF VALVE:
Aggressive JDM racing discharge sound.
8 Discharge ports that draw in surrounding air and release a unique discharge sound.
40mm hard-anodized valve for increased airflow.
Dual spring system promoted response and allows for high boost pressures.
Support up to 30 PSI boost pressure.
OIL LINE:
OIL DRAIN FEED LINE.
10AN Fittings.
Inner Diameter: 0.50"
Length: 17.00"
CNC Machined Turbo Adapter Plate.
Weldable 10AN Oil Pan Fitting Included.
Inner Diameter: 0.25"
Length: 36.00"
1/8 NPT Fittings Natural Polish Finish.
CNC Machined Turbo Adapter Plate.
Brass Fitting Block Fitting and Port Cover Included
BOOST CONTROLLER:
Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs.
High Performance Manual Boost Control From 0~30 psi Capacity.
CNC Machined Light Weight and Resistant to Rust.
Hose clamp and all necessary hardware for complete installation.
1-30 PSI Adjustable.
V-BAND FLANGE ADAPTER:
High Quality Cast Raw Steel Clamps
2.5" V-band for Turbo Outlet
Comes with Steel Welding Flange
Fits all T3 and T3/T4 hybrid turbos with V-band standard size fitting
EXHAUST DOWNPIPE TUBE: 2.5" t3/t4 steel TIG welded downpipe.
Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing. This provides a simple starter solution for connecting your turbo's exhaust to your existing exhaust system. The pictured metal composite Flange is included!
ATTENTION:
For emissions related items please check with your local jurisdiction for specific requirements before purchasing.
No installation instructions included unless otherwise specified.
Colors may be randomly selected depending on inventory.
Modification will be required for complete installation.
Professional TURBO INSTALLER is Highly recommend. Any damage during installation will not be refunded.
Your valid phone number is necessary for the shipping, otherwise we can't guarantee that the package would arrive safely.
The piping that comes with this kit is universal, and will have to be modified to fit most applications
Please contact us directly for any questions or concerns