top of page
1990-1993 MAZDA MIATA NA 1.6L BOLT-ON TURBO KIT
 
1990 1991 1992 1993 MAZDA MIATA 1.6L MX-5
**NOT FIT 1.8L OR NB MODEL
 
 
T3/T4 TURBOCHARGER
1. Turbo Specification:
- Standard 5 bolt T3 Flange.
- 5 Bolt Standard Hot Side.
- Standard T3/T4 Flange.
- Oil Inlet - 1/8 NPT Oil Inlet.
- Bearing Type - Journal Bearing.
- Wet Floating Bearings.
- Cooling Type: Oil Cooled.
 
2. Compressor Specs:
- 3" Compressor Inlet.
- 2.07" Inducer.
- 2.36" Major.
- 2" Compressor Outlet .
- T04B/T4 Type Compressor Housing.
- Compressor .50 A.R.
- Compressor .57 Trim.
- 8 Blade Type T4 Compressor Wheel.
 
3. Turbine Size: 
- T3 Type 4 Bolt Turbine flange.
- 5 bolt Exhaust flange
.- Turbine .63 A.R. 
- 2.48" Minor and 2.89" Major Propellar.
- T3 Turbine Housing.- 2.274" Outlet.-
 
INTERCOOLER:
 
1. 6061 Light Weight Billet Aluminum Construction.
2. Tube & Fin Light Weight Design.
3. Construction: Machine Cut and Stamped Hand Welded.
4. Working Pressure: 5~50PSI.
5. Pressure Drop:2~5psi@35psi;0.2~0.5psi@15psi.
6. Hot Air Temperature: 32°F~302°F (0°C~150°C)
7. Compress Air Flow Rate: < 350 Cubic Feet/Min Rated to 500 Max HP.
8. Overall Size - 27" x 7" x 2.5"
9. Core Size - 21" x 6.5" x 2.5"
10. In/Outlet - 2.5" OD / 2.25" ID
 
 
MANIFOLD:
 
1. Made of high quality cast construction,
2. Bolt-On to Mazda 1.6L Series Engine
3. Standard T3 (T3/T4, T04e) Turbo Flange Configuration Outlet (M10 studs).
4. Increase Engine Exhaust Output and Efficiency.
 
 
STEEL TUBE:
 
1. Made of high quality Stainless steel
2. Pre-weld perfect dual wastegate flange
3. flex pipe design
4. Comes with pre-weld O2 oxygen bung
5. 5 Bolt Flange inlet for T3 turbo
 
PIPING:
 
1. Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping.
2. Powder-Coated Surface Finish.
3. 2.5" Piping Diameter.
4. 2.0mm Pipe Thickness.
5. Increase 65% Air Flow comparing with other Standard Piping.
 
 
 

1990-1993 MAZDA MIATA NA 1.6L BOLT-ON TURBO KIT

SKU: TBK-MZ1.6DP07PK42
$1,194.99 Regular Price
$1,135.24Sale Price
  • SILICONE COUPLER:
     
    1. Material:Made of high quality silicone material
    2. Thickness of wall:5 mm, 4 ply reinforced
    3. Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI)
    4. Bursting Pressure: 2 Mpa
    5. Working Temperature: -76°F (-60°C ) to +500°F (+260°C)
    6. Size tolerance:+/-0.5 mm
     
     
    T-BOLT CLAMP:
     
    1. Made of High quality 301 ss Stainless Steel Clamp
    2. Stainless steel construction resists corrosion
    3. Provide uniform sealing pressure for a positive
    4. Polished finish increases engine bay aesthetics
    INTAKE FILTER:
     
    1. Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable.
    2. Improves Up to 95% Filtration Efficiency.
    3. Designed to increase horsepower and acceleration.
    4. Width: 6" Inlet: 3.0" Overall Tall: 3.5" Mesh Tall: 2.5"
     
     
    BLOW OFF VALVE:
     
    1. Aggressive JDM racing discharge sound.
    2. 8 Discharge ports that draw in surrounding air and release a unique discharge sound.
    3. 40mm hard-anodized valve for increased airflow.
    4. Dual spring system promoted response and allows for high boost pressures.
    5. Support up to 30 PSI boost pressure.
  • OIL LINE:
     
    1. OIL DRAIN FEED LINE.
    2. 10AN Fittings.
    3. Inner Diameter: 0.50"
    4. Length: 17.00"
    5. CNC Machined Turbo Adapter Plate.
    6. Weldable 10AN Oil Pan Fitting Included.
    7. Inner Diameter: 0.25"
    8. Length: 36.00"
    9. 1/8 NPT Fittings Natural Polish Finish.
    10. CNC Machined Turbo Adapter Plate.
    11. Brass Fitting Block Fitting and Port Cover Included
     
     
    BOOST CONTROLLER:
     
    1. Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs.
    2. High Performance Manual Boost Control From 0~30 psi Capacity.
    3. CNC Machined Light Weight and Resistant to Rust.
    4. Hose clamp and all necessary hardware for complete installation.
    5. 1-30 PSI Adjustable.
     
     
    WASTEGATE:
     
    1. High strength Alloy aluminum body with steel head.
    2. Comes with 8 psi spring installed.
    3. Protect the turbo system from over boosting.
    4. Complete install kit included .

Related Products

bottom of page